7700 Series
Slope Glazed
Manko’s 7700 series slope glazed is an economical system designed for small sloped glazed applications. This non-structural sloped system is designed for glazing panels set at an angle greater than 35° from the horizontal plane. The 7700 series slope glaze system is available for limited applications (prior approval by Manko required) and must be fabricated by Manko.
Please contact Manko Window Systems for additional job specific information on 7700 Slope Glazed system.
Product Features
- 2 1/2” Tapered Face Dimension
- Minimum 35° Angle Required
- Gutter System for Integral Drainage
- 1” – 1 1/8” Overall Glazing Cavity
- Recommended Minimum 0.060” Interlayer for Interior Laminated Glazing Lite
- Typical Applications; Atrium or Awning Conditions
- Anodized and AAMA Paint Finishes Available
- Fabricated In-House by Manko
