Overview

150 Series Wide Stile Storefront Door (1 3/4” Depth) ARCHITECTURAL GRADE Aluminum Door Manko’s 150 Series aluminum storefront entrance door is our traditional wide stile door with 5” stiles. The 150 series comes standard with a 8” bottom rail, but is readily available with optional 10” and 12” bottom rails. Horizontal midrails are available with options ranging from 2” to 12”. These doors are flexible enough to meet most design and hardware requirements. The availability of multiple glazing stops allow for the use of a broad range of glazing products (typically 1/4” or 1”). These storefront doors utilize a telescoping mortise and tenon joint coupled with a horizontal shear block, that is then further reinforced with a 3/8” steel tie rod and sleeve. The tripled redundancy ensures structural integrity and long term durability. The mortise and tenon construction increases adjustability along with improving door aesthetics at all joints by never allowing a raw cut aluminum edge to show on a rail.

250 Curtain Wall Framing

Download .PDF Download .DXF 250%20Curtain%20Wall%20Framing

450 1.75″ Storefront Frame

Download .PDF Download .DXF 450%201.75%20Storefront%20Frame

450 2″ Storefront Frame

Download .PDF Download .DXF 450%202%20Storefront%20Frame

1450 Storefront Frame

Download .PDF Download .DXF 1450%20Storefront%20Frame

2450 Storefront Frame

Download .PDF Download .DXF 2450CG%20Storefront%20Frame

2450xpt Storefront Frame

Download .PDF Download .DXF 2450CG%20XPT%20Storefront%20Frame

2450FS Storefront Frame

Download .PDF Download .DXF 2450FS%20Storefront%20Frame

2600xpt Storefront Frame

Download .PDF Download .DXF 2600XPT%20Storefront%20Frame