- 3.5” Deep System
- Polyamide thermal barrier
- Monumental Profile
- Structurally tested
Overview
3527i Series Project In-Out Casement Aluminum Window3.5″ ARCHITECTURAL GRADE Fixed, Projected and Casement Window System
The need for a more thermally efficient window with a 3 ½” deep monumental profile led to the development of the Manko 3527i series window system.
The 3527i uses a 24mm polyamide crimped in place structural thermal barrier in lieu of the traditional two-part poured and debridged system. Operable sash sections remain at the shallower 2 ¾” depth. This combination allows for the desired increase in thermal performance, the desired monumental depth profile, but retains the economy of the 2 ¾” operable vents while avoiding the hinging and locking issues inherent with a 3 ½” operable sash.
The 3527i series carries AAMA Architectural Class (AW), and NFRC 100, 200, and 500 certification. Perimeter receptor systems and a full range of panning and snap trims are also available. The flush sash design and dual weathering minimizes air infiltration. Structural wall areas are .125” thick. Main frame construction is mortise and tenon joinery with dual integral screw races. Operable sash use mechanically joined, angle reinforced, mitered corner construction. Interchangeable interior glass stops accommodate glazing infill options from ¼” thru 2”.
Features
- 3 1/2” Deep main frame
- Monumental profile
- Thermally broken
- Polyamide crimped in place structural thermal barrier
- Structurally tested per ANSI/AAMA 101
- Certified per NFRC 100, 200, and 500
- Flush vent construction
- Angle reinforced operable sash construction
- Mortise and tenon fixed frame construction
- Dual EPDM weathering at operable sash
- Preglazed at factory
- 1/4” to 2” glazing options
- Dual glazing available with optional blinds and removeable or hinged sash
- Hermetically sealed blinds
- Equal leg frames
- Horizontal stacking options
- Structural vertical mullions
- True divided lites
- Available in anodized finishes
- Available in a full range of painted finishes
- Spandrel and composite glazing panels available
- Extruded screen frames
- Fiberglass, aluminum, or stainless steel screen options
- Custom configurations available with standard details
- Panning systems available
- Receptor systems available
- Optional starter sills with extensions
- Interior snap trims
- Custom profiles available
- Manufactured with 6063 –T5 and 6063-T6 aluminum alloys
Sill Starters
Download .PDF Download .DXF Download .BAK 3527i%20Sill%20Starter
