- 2.75” Deep System
- Flush vent
- Angle reinforced
- Polyamide thermal barrier
- Structurally tested
Overview
2727i Series Project In-Out Casement Aluminum Window2.75″ ARCHITECTURAL GRADE Fixed, Projected and Casement Window System
The need for a more thermally efficient window that still maintained a shallow profile led to the development of the Manko 2727i series window system.
The 2727i uses a 24mm polyamide crimped in place structural thermal barrier in lieu of the traditional two-part poured and debridged system. This combination allowed for the desired increase in thermal performance while retaining the economy of its predecessor.
The 2727i series carries AAMA Architectural Class (AW), and NFRC 100, 200, and 500 certification. The frame and operating sash depths are both 2 3/4”. Perimeter receptor systems and a full range of panning and snap trims are also available. The flush sash design and dual weathering minimizes air infiltration. Structural wall areas are .125” thick.
Main frame construction is mortise and tenon joinery with dual integral screw races. Operable sash use mechanically joined, angle reinforced, mitered corner construction. Interchangeable interior glass stops accommodate glazing infill options from ¼” thru 2”.
Features
- Structurally tested per ANSI/AAMA 101
- Life cycle tested per AAMA 910
- Forced Entry Resistance Level 10
- Overlap vent construction
- Integral structural thermal barrier
- Dual EPDM weathering at operating sash
- Angle reinforced vent corner joinery
- Pre-glazed at factory
- 1/4″ to 2″ glazing infills
- Equal or unequal leg frames
- Vertical or horizontal stacking
- Full range of anodized finishes
- Full range of architectural painted finishes
- Spandrel and composite glazing panels
- Extruded screen frames
- Aluminum screen wire
- Wide variety of locking, operating, and hinging hardware
- True, applied, and between glass muntins
- Dual glazing options with removable interior sash blinds
- Hermetically sealed integral blinds
- Custom configurations with standard details
- Standard/custom panning systems
- Interior snap trims
