- Frame Depth: 3 ¼”
- Vent Depth: 3 ¼”
- 36mm Thermal Strut
- Glazing Cavity: up to 2”
Overview
3232xpt Series Project In-Out Casement Aluminum Window3.25″ ARCHITECTURAL GRADE Fixed, Projected and Casement Window System
The adoption of new and tougher energy codes brought about the need for a new ultra-thermally efficient Architectural Grade window system. This brought about the development of the Manko “xpt” series of windows.
The Manko 3232xpt uses an extra wide 36mm polyamide crimped in place structural thermal barrier. Thermal performance is further enhanced by the use of internal “convection barriers”. Convection barriers are non-structural inserts that are strategically located in the window assembly to create multiple dead air spaces in the frame assemblies. These dead air spaces greatly increase the overall performance of the window frame. An added benefit of this system is that there is also a significant increase in condensation resistance.
While the 3232xpt can be glazed with convevtional dual pane units, it has been optimized to take full advantage of triple pane units. The 3232xpt series carries AAMA Architectural Class (AW), and NFRC 100, 200, and 500 certification. The frame and operating sash depths are both 3 1/4”. Perimeter receptor systems and a full range of panning and snap trims are also available. The flush sash design and dual weathering minimizes air infiltration.
Structural wall areas are .125” thick. Main frame construction is mortise and tenon joinery with dual integral screw races. Operable sash use mechanically joined, angle reinforced, mitered corner construction. Interchangeable interior glass stops accommodate glazing infill options from 1” thru 2 1/2”.
Features
- 3 1/4” Deep System
- Extreme thermal performance
- 36mm Polyamide crimped in place structural thermal barriers
- Internal convection barrier cavities
- Structurally tested per ANSI/AAMA 101
- Certified per NFRC 100, 200, and 500
- Flush vent construction
- Angle reinforced operable sash construction
- Mortise and tenon fixed frame construction
- Dual EPDM weathering at operable sash
- Preglazed at factory
- 1” to 2 1/2” glazing options
- Dual glazing available with optional blinds and removable or hinged sash
- Hermetically sealed blinds
- Exterior beveled grids available with “GO” option
- Horizontal stacking options
- Structural vertical mullions
- True divided lites
- Available in painted and anodized finishes
- Spandrel and composite glazing panels available
- Extruded screen frames
- Custom configurations available
- Panning systems available
- Receptor systems available
- Optional starter sills with extensions
- Interior snap trims
- Custom profiles available
- Manufactured with 6063 –T5 and 6063-T6 aluminum alloys
